It may involve different processes, depending on the specific circumstances. Here are some general steps to follow to remove a fireplace:
We evaluated the structure:
We will evaluate the structure in which it is installed to determine if their removal will have an impact on the integrity of the building.
Disconnection of services:
If the fireplace is connected to heating systems, we make sure to disconnect them properly. This may involve shutting down the supply of gas or associated wiring.
Removal of coatings and materials:
Remove any coating or decorative material of the fireplace, as can be tiles, wood panels or other materials.
Removal of the flue:
If the chimney has a flue disassembled and removed carefully by using specific tools to be a very delicate part of the process.
Removal of the structure of the chimney:
Once you have removed all the components of the fireplace, we proceed to the removal of the main structure of the fireplace
Repair and finish:
After removing the fireplace, we will repair the wall or the ceiling where it was located, using masonry work, painting and other finishes, as needed.
DISCONNECTING FIREPLACE
- Turn off any source of heat: We make sure you turn off any heat source associated with the fireplace.
- We consent to the fireplace: It is possible that we may need to access different points in order to disconnect it. This may involve removing access panels, disassemble coatings or remove any cover that is present.
- We identify the connections: We will identify the connections that bind to the heating and ventilation systems. This could include pipes, flues, electrical wires or other components.
- Close the gas valves: If you are connected to a gas source, such as a boiler, or a heater, we must close the gas valves corresponding to interrupt the supply of gas to the fireplace
- Disconnect the pipes and ducts: This may involve loosening clamps, unscrew connections or separate couplings
- Disconnect the electrical cables: If you are equipped with electrical components, such as a fan or a lighter, we disconnected the electrical cables.
- Seal openings: Seal openings in the wall or ceiling to prevent air leaks and unwanted ensure proper insulation.
SAFETY:
- Structural support: If the fireplace is an integral part of the structure of the building, it is important to make sure that the structure is properly supported.
- Right tools: We use the right tools for the job, such as hammers, screwdrivers, saws or other tools of demolition.
- Safe disposal of debris: Dispose of the debris in a safe manner. Use containers or bags resistant to transport the rubble.
Removal of coatings and materials:
The removal of coatings and materials associated with a fireplace can be a part of the withdrawal process.
- We identify the coatings and materials: Can be tiles, wood paneling, stone, plaster or other decorative items.
- We remove coatings: We will use tools such as a hammer, a chisel, or a lever to detach from the surface of the fireplace.
- Disconnect any accessory or component: If there are accessories or components attached to the coatings, such as a shelf of wood or a metal grille.
- Cleaning and preparation: Once we have removed the coverings and materials, we will clean up and prepare the surface for subsequent repair or completion.
Removal of the duct smoke:
We gain access to the flue from the top of the roof or from where it is installed. Disconnect the connection points. Remove the flue of the chimney.
Removal of the structure of the chimney:
It is a complex process and potentially dangerous that requires extra precautions and, in many cases, the assistance of professionals specialized in demolition or construction.
Repair and restoration:
Once we have removed the chimney, it will be necessary to make repairs in the surrounding structure to ensure that it remains in good condition. This process include the restoration of walls, ceilings or floors, depending on how you connected the fireplace
The completion of the withdrawal of the fireplace, mark the success of a process is meticulous and careful. We have dismantled and removed with safety to the structure of the fireplace, ensuring the structural integrity of the housing. Each brick and the component is removed in a professional manner and handled properly.

RUM Rehabilitation is a construction company that specializes in this type of works and offer you a wide variety of services for the home and commercial premises in the municipalities of Guardamar, Torrevieja, Orihuela, and Orihuela Costa, Elche, Crevillente, Santa Pola, Rojales (Ciudad Quesada, and housing developments), Urbanización La Marina (San Fulgencio), Pain, Algorfa, Albatera, Benijófar, Los Montesinos, San Miguel de Salinas, Alicante, as well as in the municipalities close to Torrevieja/Guardamar.
Our services include comprehensive reforms, rehabilitation, construction, decoration and redistribution of spaces in homes, business premises and offices. In addition, we offer specialized services of carpentry, painting, plumbing, electrical, facilities, floors and tiles.
If you need to renovate your home or apartment, you request our price calculator to know the price of reform and starts transforming your space today.
Specialists in:
- Rehabilitation
- Restoration
- Reforms
We strive to be the with the best company with the best service.
RUM Rehabilitation is a company born in Guardamar del Segura (Alicante) with more than 20 years of proven experience in the sector.
From RUM REHABILITATION we will be happy to provide free quoteto perform the REHABILITATION or RESTORATION all type of jobs in BUILDINGS and residential DEVELOPMENTS, as well as REFORMS of Single-FAMILY HOMES and COMMERCIAL PREMISES.
Guaranteed Quality
In our company we use high quality materials and work with the best vendors of the market, to ensure that the end result is long-lasting and satisfactory to our customers.
Personalized Service
If you want to hire our services please do not hesitate to contact us. We will offer you a free quotation and we will be happy to help make their projects a reality.
We offer a wide variety of services for the home and commercial premises in the municipalities of Guardamar, Torrevieja, Orihuela, and Orihuela Costa, Elche, Crevillente, Santa Pola, Rojales (Ciudad Quesada, and housing developments), Urbanización La Marina (San Fulgencio), Pain, Algorfa, Albatera, Benijófar, Los Montesinos, San Miguel de Salinas, Alicante, as well as in the municipalities close to Torrevieja/Guardamar.
Our services include comprehensive reforms, rehabilitation, construction, decoration and redistribution of spaces in homes, business premises and offices.
In addition, we offer specialized services of carpentry, painting, plumbing, electrical, facilities, floors and tiles. If you need to renovate your home or apartment, you request our price calculator to know the price of reform and starts transforming your space today.
If you want RUM REHABILITATION will study the renovation of your building or renovation of your home
You can also call us at the phone numbers below, and we will clarify any doubts you may have.

